Specifications
Volt Meter Resolution 1mV/step, 0 to 51,673mV
Volt Meter Error (typical) Less than +/-(0.1% + 10mV)
Current Resolution 10mA/step, 0 to 10,000mA/Channel, applies to both charge and discharge modes of operation
Current Error (typical) Less than +/-(0.1% + 2mA)
Battery Voltage Range NiCd & NiMH 1-30 cells; lead acid 1-18 cells; lithium ion all types 1-11 cells except LiFePO4 1-12 cells
Battery Capacity Range 300mAh to 200Ah; 200Ah capacity de-rated for charge voltage greater than 20 Volts, limited by power and C/20 = 10A
Charge Power (continuous) 200 Watts via any single channel or 200 Watts via sum of channels, up to +10,000 mA/Channel
Discharge Power (continuous) 200 Watts via any single channel or 200 Watts via sum of channels, up to -10,000 mA/Channel
Chemistries Serviced Nickel cadmium, nickel metal hydride, lead acid, lithium ion
Lithium Ion Types (cathode) Cobalt oxide, iron phosphate, manganese oxide, nickel-cobalt-manganese, plus new cathode materials when available
Temperature Range/Resolution -30 to +96 degrees Celsius with 0.1 degree resolution; Accepts 1-100k nominal thermistor values; Ideal value 10k
Temperature Recording 0-63 degrees Celsius by 1 degree C/step, or -30 to +96 degrees Celsius by 2 degrees C/step
Charge Methods Nickel batteries - constant current; lead acid and lithium ion batteries - constant voltage with current limit
Discharge Methods Constant current, constant power, constant resistance, pulsed constant current 2-5 steps
Pulse Discharge Range/Slew 500us-10ms in 500us/step, 10-60,000ms in 1ms/step, discharge current slew rate 15Amps/ms
High Speed Data Logging 500us/point or 2k points/sec, select 1mV or 50mV resolution, log snapshot or continuous(5 min max), digital smoothing
Full Charge Detection Voltage inflection, negative delta V, input capacity, peak voltage, waning current (lead acid & lithium ion)
Maximum Channels 432 channels via a single USB host controller by connecting 108 analyzers using 19 seven port hubs
Enclosure Heavy duty aluminum enclosure with powder coat finish. Now available in seven colours; red, green, brown, black, white, yellow and blue
Dimensions Imperial : LxWxH 10.50x9.30x2.75inches Metric : LxWxH 267x236x70mm
Weight 12lbs / 5.5kg
Input Connection IEC AC input connector with third wire earth ground connection
Output Connection (Channels) Analyzer is fitted with four 8 pin Neutricon male receptacles that mate with four female plug and cable sets included
Input Voltage Universal AC operation from 90-260VAC, 50-60Hz
Input Power 250 Watts maximum at 90VAC
Input Fuse 4 Amp250VAC 5x20mm
System Requirements Windows 98, 2000, XP or Vista operating system with USB 2.0 full speed support
|